Support or Contact
Having trouble with the controller ? Contact support and i’ll help you sort it out.
Setup Instructions
- First ( ! ), for a save buspowered mode use the gray adapter cable
- The last module should have a plugged “Terminator” on
[ OUT ]( printed Silklayer ) - Each module must use a unique channel. ( A0 / A1 / A2 / … / A7 ) and set it to
[ ON ] - Set on the blue or red “Terminator” the DIP switch(es) to
[ OFF ]depending on how many modules are available. - See image below
Technical MIDI Informations
- Each module use there own MIDI Channel
- The first module use Channel 16, the second one use Channel 15 and so on.
- The Pots use the MIDI CC numbers 102 – 109, these are unused according MIDI Standard
Changelog
v1.4.2a ( not released )
- Change resitors to SMD Type
- Change Pro Micro USB Pin connector to a smaller footprint
- Change BUS Power to 16 Pin for 5V connection ( In some cases the 12V Bus Power will kill the Pro Micro ! )
v1.4.1
- Change to USB C Type
v1.4
- Initial version
